Difference between revisions of "Bill of materials"
(→Sharing needs) |
|||
| Line 34: | Line 34: | ||
==Sharing needs== | ==Sharing needs== | ||
| − | ===Measuring devices and | + | ===Measuring devices and accessories=== |
Although not strictly required to physically make a S.H.O. drive, it is very helpful to have in hand devices such as digital multimeters and thermometers, Recording data from your results is highly recommended, as it is the essential "fruit" of each project which will raise legitimacy of one' efforts. | Although not strictly required to physically make a S.H.O. drive, it is very helpful to have in hand devices such as digital multimeters and thermometers, Recording data from your results is highly recommended, as it is the essential "fruit" of each project which will raise legitimacy of one' efforts. | ||
Revision as of 12:34, 1 May 2016
This Bill of materials is designed to take into account your particular project goals. "Materials" herein is referred to in a broad sense, including not only the material parts which make up the device, but also the "materials" of the project as a whole activity, including safety gear, hand tools, power tools, furniture, measuring devices, and recording devices.
Contents
Parts
All S.H.O. Drives will share certain things in common.
- Every S.H.O. Drive will contain one or more conductive windings, and each will look like an S, an H, or an O depending on how viewed and may be referred to as a S.H.O. Coil.
- Every S.H.O. Drive will contain one or more permanent magnets located inside the S.H.O. Coil(s) which will rotate mechanically.
- Every S.H.O. Drive will contain a support structure to carry the winding(s) and permanent magnet(s).
S.H.O. Drives will differ in their implementation. For each S.H.O. Drive, the parts must have some level of compatibility with each other. Design specifics may vary widely, and the overall size of each S.H.O. Drive is probably the most important of them.
S.H.O. Drive Mark I
Making needs
Safety gear
Safety gear is an absolute must in any S.H.O. Project. See to it that you have this covered.
Hand tools
Hand tools are essential for any S.H.O. Drive maker.
Power tools
It is very convenient to use power tools, although more care is needed in their operation.
Furniture
Depending on your resources, you may have a dedicated working space already in place, such as many have in their own private tool shed or garage. Others are not necessarily as fortunate.
Sharing needs
Measuring devices and accessories
Although not strictly required to physically make a S.H.O. drive, it is very helpful to have in hand devices such as digital multimeters and thermometers, Recording data from your results is highly recommended, as it is the essential "fruit" of each project which will raise legitimacy of one' efforts.
Some S.H.O. Drives may require higher amp-capacity connecting leads than ones included with the device(s), so those should be bought as needed.
Recording devices and gear
You may or may not be one of those people wanting to share their S.H.O. Drive replication to the world. For those that do, it is helpful to have a picture or video recording device.
Transparency
In order to demonstrate more convincingly that there are no hidden wires, batteries, and so forth, extra steps have been taken in preparation for making and presenting the world's first S.H.O. Drive.
Teaching needs
As more people make S.H.O. Drives, the need to teach the principles of the S.H.O. Drive will continue to grow. Whether addressing to an audience on the web or in person, presentations may be taken more seriously if appropriate visual aids are employed.
Props
Multimedia tools
Site map
HQ ● Glossary ● April 2016 Presentation
|
|
